Measurement parameters
The GDI51 is an indoor LoRaWAN gateway based on the SX1302 chipset. Select the regional frequency version and confirm backhaul, power supply and network-server compatibility.
The GDI51 is an indoor LoRaWAN gateway based on the SX1302 chipset. Select the regional frequency version and confirm backhaul, power supply and network-server compatibility.

Product photograph · GDI51
The GDI51 is an indoor LoRaWAN gateway based on the SX1302 chipset. Select the regional frequency version and confirm backhaul, power supply and network-server compatibility.
LoRaWAN gateway
Get a quoteSpecifications below are transcribed from the supplier page. Final configuration, calibration and suitability require confirmation before ordering.
| Model | GDI51 |
|---|---|
| Power supply | 48V PoE / 5V Type-C |
| Protection rating | IP53 |
| Operating temperature | -20℃ ~ 65℃ |
| Dimensions | 151mm × 125mm × 30mm |
| LoRa chipset | SX1302 |
| Frequency bands | CN470 / EU433 / EU868 / AS923 / AU915 / US902 |
| Standard configuration | Pending confirmation |
| Optional configuration | Gigabit Ethernet / CAT1 4G / WiFi |
| Model / Configuration checklist | GDI51 |
Downloads are not available until the technical documents and permission to distribute them are confirmed.
The GDI51 is an indoor LoRaWAN gateway based on the SX1302 chipset. Select the regional frequency version and confirm backhaul, power supply and network-server compatibility.
RS485 Modbus and LoRaWAN are integration options to discuss, not confirmed features of every product. Check protocol, power supply and network compatibility for the selected model.
Pending confirmation. Specify the medium, target parameters, measurement range, required accuracy, installation conditions and controller interface. Suitability must be checked against an approved datasheet.
This page outlines project planning, not an installed customer case or a guaranteed outcome. Confirm product suitability, site conditions and the integration plan before procurement.
RS485 Modbus and LoRaWAN are integration options to discuss, not confirmed features of every product. Check protocol, power supply and network compatibility for the selected model.

For greenhouse CO₂ monitoring, the YF500-CO2 combines carbon dioxide, temperature and humidity measurements. Compare the required measurement range and controller interface before selecting an ordering code.
Technical information
The YF100 is an indoor air quality monitor with model-dependent measurement channels and communications. Specify the required particles, gases and environmental parameters in your enquiry.
Technical informationSpecify the medium, target parameters, measurement range, required accuracy, installation conditions and controller interface. Suitability must be checked against an approved datasheet.
No. Interfaces, power supplies and accessories depend on the confirmed model. Request a written configuration identifying standard and optional items before ordering.
You can prepare and download an enquiry draft. Mailbox, online submission and WhatsApp are pending configuration; delivery has not been tested.
The GDI51 is an indoor LoRaWAN gateway based on the SX1302 chipset. Select the regional frequency version and confirm compatibility with the intended devices and network server.
Plan antenna position, indoor mounting, power and network access together. Coverage depends on the building, surroundings, antenna and devices; a site survey may be needed.
Confirm which Ethernet, cellular or Wi-Fi options are included. RS485 Modbus is a separate wired interface and should not be assumed to be a gateway feature.
Share your application, target parameters and integration requirements.