Measurement parameters
The YF500-S combines soil moisture, temperature, electrical conductivity and pH measurement for root-zone monitoring. Confirm the probe configuration and soil-specific calibration requirements.
ODSENSE / SENSING THE WORLD. CONNECTING YOUR BUSINESS.
YF500-S · Multi-parameter soil sensor
The YF500-S combines soil moisture, temperature, electrical conductivity and pH measurement for root-zone monitoring. Confirm the probe configuration and soil-specific calibration requirements.
Measurement parameters
Product photograph · YF500-S
Source reviewed · Configuration to confirm
YF500-S · Multi-parameter soil sensor
The YF500-S combines soil moisture, temperature, electrical conductivity and pH measurement for root-zone monitoring. Confirm the probe configuration and soil-specific calibration requirements.
Soil moisture sensor
Get a quoteTechnical information
Specifications below are transcribed from the supplier page. Final configuration, calibration and suitability require confirmation before ordering.
| Model | YF500-S |
|---|---|
| Power supply | DC 10~30V |
| Protection rating | IP68 |
| Power consumption | 0.5W |
| Dimensions (Main unit) | 124×94×45 mm |
| Power supply / Standard configuration | 24V |
| Standard configuration | Pending confirmation |
| Optional configuration | RS485 / LoRaWAN / WiFi / 4G / BLE / 4-20mA / 0-5V |
| Model / Configuration checklist | YF500-S(R) / YF500-S(L) / YF500-S(W) / YF500-S(4G) / YF500-S(B) / YF500-S(20) / YF500-S(V5) |
| Measurement parameters | Measurement range | Resolution | Accuracy |
|---|---|---|---|
| Soil moisture | 0~100% | — | Pending confirmation |
| Temperature | -20℃~60℃ | — | ±0.5℃ |
| Electrical conductivity sensor | 0~20000 μS/cm | — | ±3% FS |
| pH | 0~14 pH | — | ±0.1 pH |
The source lists moisture accuracy as ±2% / ±3% without the conditions for each value. Accuracy remains pending rather than choosing one value.
Selection considerations
Downloads are not available until the technical documents and permission to distribute them are confirmed.
Standard configuration / Optional configuration
RS485 Modbus and LoRaWAN are integration options to discuss, not confirmed features of every product. Check protocol, power supply and network compatibility for the selected model.
Calibration / Installation and maintenance
Pending confirmation. Specify the medium, target parameters, measurement range, required accuracy, installation conditions and controller interface. Suitability must be checked against an approved datasheet.
Built around your environment.
This page outlines project planning, not an installed customer case or a guaranteed outcome. Confirm product suitability, site conditions and the integration plan before procurement.
Describe the crop, growing medium, ventilation system and sensor location. Discuss CO₂, temperature, humidity and soil moisture requirements separately; confirm condensation exposure and controller compatibility.
Related measurement areas
YF500-CO2 · Greenhouse CO₂, temperature and humidity sensor
For greenhouse CO₂ monitoring, the YF500-CO2 combines carbon dioxide, temperature and humidity measurements. Compare the required measurement range and controller interface before selecting an ordering code.
Technical information
GDI51 · LoRaWAN gateway
The GDI51 is an indoor LoRaWAN gateway based on the SX1302 chipset. Select the regional frequency version and confirm backhaul, power supply and network-server compatibility.
Technical informationFrequently asked questions
How do I choose a suitable sensor?
Specify the medium, target parameters, measurement range, required accuracy, installation conditions and controller interface. Suitability must be checked against an approved datasheet.
Are all communication options standard?
No. Interfaces, power supplies and accessories depend on the confirmed model. Request a written configuration identifying standard and optional items before ordering.
Can I submit an enquiry now?
You can prepare and download an enquiry draft. Mailbox, online submission and WhatsApp are pending configuration; delivery has not been tested.
Soil sensor applications and installation
Plan the configuration for your project.
Root-zone monitoring
The YF500-S combines soil moisture, temperature, electrical conductivity and pH measurements for agricultural monitoring. Interpretation depends on soil conditions, installation and calibration.
Site and probe placement
Select representative locations and discuss probe depth, soil contact, irrigation patterns and maintenance access. Moisture and electrical conductivity describe different soil properties.
Configuration and ordering
Confirm the probe combination, interface and calibration requirements. The source gives two moisture-accuracy figures without their conditions, so the value remains pending confirmation.
ODSENSE
Get a quote What do you need to measure?
Share your application, target parameters and integration requirements.